Edinburgh · Scotland

Bath chip & crack repair in Old Town, Edinburgh

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Old Town and across Edinburgh. Free, fixed quotes from your photos.

  • Repairs from £95
  • Chips from dropped bottles, tiles or tools
  • Rust spots where the enamel has gone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath Repair near Old Town

Old Town questions

Can landlords and businesses in Old Town book you?

Yes. We carry out repairs for landlords, agents, builders, hotels and homeowners.

Do I need to be at home?

Yes. We need access to the room while we work, and we’ll agree a time with you.

Can a cracked acrylic bath be fixed?

Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

When can I use it again after the repair?

Usually the same day or the next, depending on what we’ve done. We’ll confirm the exact time when we finish.

Do you cover Old Town?

Yes. We work across the UK and travel to Old Town and the rest of Edinburgh. Send photos and we’ll quote, or call 0345 017 0787.

Bath repair in Old Town without replacing anything

You can usually use the bath the next day. A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Our technicians work on whirlpool & spa baths, acrylic and cast iron enamel, and people most often call us about damage caused while the bathroom was being fitted and chips from dropped bottles, tiles or tools.

All our work is covered by a one-year guarantee. Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Area
Old Town (EH1, EH8, EH3)
County
Edinburgh
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
22 October 2026
Rusty chip next to a bath plughole, before and after repair

Do you need bath repair in Old Town?

Most bath damage starts with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust once water gets in. Acrylic baths, on the other hand, tend to crack if they aren’t properly supported, often around the taps or the plughole.

People usually call us when they notice something like this:

  • Rust spots where the enamel has gone
  • Scratches and burns
  • Cracks and holes in acrylic baths
  • Chips from dropped bottles, tiles or tools

What your quote should include

  • Aftercare advice
  • What preparation is included
  • How your room will be protected
  • How long the guarantee is and what it covers

Our hiring checklist

Why repair rather than replace?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why Old Town customers choose us

  • CHAS, Constructionline and SafeContractor accredited
  • Colour mixed on the day to match
  • Every repair guaranteed for a year
  • Fixed prices from your pictures

Take a look at our prices page and resurfacing vs replacement cost guide.

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the next day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area
  • Make sure the room can be ventilated

Get a quote

Send us pictures of the damage and a wider shot of the whole item, with your EH1 postcode, and we’ll reply with a fixed price.

Get a free quote

Advice

About Old Town

Old Town is about 1 miles north-east of Edinburgh, in Edinburgh. Jobs in Old Town are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in all 175 towns and villages in Edinburgh, from the larger towns to small villages.

We cover every part of the EH1, EH8 and EH3 postcode area. That includes homes on Meuse Lane, High Street and Meadow Lane and the roads around them. Close by, we cover Lauriston (1 mile south-west), Buccleuch (1 mile south-east), Holyrood (1 mile north-east), Dumbiedykes (1 mile east) and Canongate (1 mile north-east).

Landmarks near Old Town

In Old Town, that means homes near Old Royal High School, Free Church College and The Meadows. The nearest railway station is Edinburgh Waverley station, about less than half a mile north of the centre. Other landmarks nearby include Edinburgh Castle (less than half a mile west) and Museum of Scotland (less than half a mile south-east). The countryside around Old Town includes Salisbury Crags and Dunsapie Loch.

Map of Old Town © OpenStreetMap contributors

Honest limits

In fairness, there are a few things a repair won’t fix:

  • Cracks in acrylic we can’t reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.