County Durham · England
Bath Repair in Consett
We travel to Consett for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Cracks and holes in acrylic baths
- Rust spots where the enamel has gone
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We clean up when we’re done and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Before we arrive
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
Bath repair at your home in Consett
You can usually use the bath the next day. A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. We work on roll-top & freestanding, pressed steel enamel and cast iron enamel, and people most often call us about damage caused while the bathroom was being fitted and scratches and burns.
A one-year guarantee comes with the work, just as it does everywhere we cover. Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
- Area
- Consett (DH8)
- County
- County Durham
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 22 October 2026
Also in Consett
Do you need bath repair in Consett?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust once water gets in. Acrylic baths crack when they flex, usually near the taps or the waste.
It’s worth getting a quote if you see:
- Cracks and holes in acrylic baths
- Damage caused while the bathroom was being fitted
- Scratches and burns
- Rust spots where the enamel has gone
Questions to ask before you book
- How your room will be protected
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- When it can be used again
Consett and the surrounding area
Consett is about 12 miles south-west of Gateshead, in County Durham. Jobs in Consett are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Consett is one of 329 places in County Durham where we work. You can also see our page for Newcastle upon Tyne, about 12 miles away.
We cover every part of DH8. Jobs here include addresses on John Street Square, Station Road and Church Road. Consett is on the A691 and A692, which makes it straightforward to reach. Nearby, we also work in Blackhill (1 mile north), Crookhall (1 mile south-east), Bridgehill (1 mile north-west), The Grove (1 mile south-west) and Benfieldside (1 mile north-west). Consett is among the bigger towns we cover in County Durham.
Near you in Consett
Around Consett, we work in homes near Consett Infant School, Consett Academy and Blackhill and Consett Park. Nearby you’ll also find Shotley Bridge Hospital (1 mile north).
Repair or replace in Consett?
Replacing a fitted bath usually means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why Consett customers choose us
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Fixed prices from your pictures
Take a look at our prices page and resurfacing vs replacement cost guide.
What a repair can’t fix
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
FAQs for Consett
When can I use it again after the repair?
Usually by the next day, depending on what we’ve done. We’ll confirm the exact time when we finish.
Do you cover Consett?
Yes. We work across the UK and come to Consett. Send pictures and we’ll quote, or call 0345 017 0787.
Can landlords and businesses in Consett book you?
Yes. We work for homeowners, landlords, letting agents, builders and businesses.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
How much does bath repair cost in Consett?
Repairs from £95. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your DH8 postcode, and we’ll come back to you with a quote.
Will you leave a mess?
We cover the area with dust sheets and mask nearby surfaces before we start, and tidy up before we leave.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
About our accreditations · Every repair comes with a one-year guarantee.
