Newcastle upon Tyne · England
Bath chip & crack repair in Bensham, Newcastle upon Tyne
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bensham, with a one-year guarantee on every repair.
- Repairs from £95
- Chips from dropped bottles, tiles or tools
- Damage caused while the bathroom was being fitted
Signs you need bath repair in Bensham
Nearly all the chips we see starts with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows. Acrylic baths crack when they flex, often around the taps or the plughole.
Signs it’s time to call us include:
- Damage caused while the bathroom was being fitted
- Cracks and holes in acrylic baths
- Chips from dropped bottles, tiles or tools
- Scratches and burns
What your quote should include
- When it can be used again
- Aftercare advice
- The length of the guarantee and what it covers
- What prep work is covered
Bath repair at your home in Bensham
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can usually use the bath the next day. Our technicians work on whirlpool & spa baths, cast iron enamel and acrylic, and people most often call us about damage caused while the bathroom was being fitted and cracks and holes in acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
- Area
- Bensham (NE8, NE92, NE9)
- County
- Newcastle upon Tyne
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 22 October 2026
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the next day, the bath is ready to use.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
Places near Bensham
Other services in Bensham
About Bensham
Bensham is about 1 miles west of Gateshead, in Newcastle upon Tyne. Jobs in Bensham are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Bensham is one of 63 towns and villages in Newcastle upon Tyne we cover.
Our technicians cover all of NE8, NE92 and NE9 and the streets around it. Jobs here include addresses on Kyle Road, Fells Road and Hazel Road and the roads around them. We also travel to Low Team (1 mile west), Dunston (1 mile west), Quayside (1 mile north), Lobley Hill (1 mile south-west) and Team Valley (1 mile south). Bensham is among the bigger towns we cover in Newcastle upon Tyne.
Landmarks near Bensham
Around Bensham, we work in homes near Brighton Avenue Primary School, Gateshead Jewish Academy for Girls and The Crown Public House. The nearest railway station is Dunston station, roughly 1.2 miles west. A little further out are Bensham Hospital (0.5 miles south) and Royal Arcade (1.4 miles north). The countryside around Bensham includes Bent Hill.
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly.
Materials we work on in Bensham
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Common questions in Bensham
Do you protect the room?
We protect the room with dust sheets and masking first, and clean up before we leave.
Should I repair or replace?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can landlords and businesses in Bensham book you?
Yes. We work for homeowners, landlords, letting agents, builders and businesses.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
How much does bath repair cost in Bensham?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode, and we’ll reply with the price.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Repair or replace in Bensham?
Swapping a damaged bath for a new one usually means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
Why Bensham customers choose us
- One-year guarantee on every repair
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
Read our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
